Volkswagen Touran Service Manual: Light Alloy Wheels, Preparing
WARNING
Do not repair damaged rims by heating, welding or
adding or removing material. |
Do not repair damaged or deformed rims or rims with
cracked or deformed bolt holes. |
Only prepare wheels with tested and specified
original paint materials. |
No warranty claims can be made against the
manufacturer after preparing rims. |
|
Do not repair rims that have cracks forming on the edges.
Replace them immediately. |
Cutting work, application of heat and welding applications
of any kind are not permitted. |
Reshaping material is not permitted. |
The true running and axial run-out deviations before
preparation must not exceed the manufacturing tolerance of 0.8
mm. |
Only cast light alloy wheels may be primed. These wheels
have the material identification AlSi xx on the inside. |
Forged wheels may only be painted. |
Preparation is limited to the painted surfaces. |
Wheels that have been worn smooth that only have a clear
coat may not be repaired. |
Only surface damage on the visible side of the wheel may be
prepared. |
Damage must not be more than 1 mm deep. |
Up to 50 mm of the rim flange may be removed and filled. |
|
|
|
To maintain the decorative appearance of light alloy wheels
for a long time, regular care is necessary.
In particular, road salt and dust from brake ...
Removing
The wheel is removed.
Note
Hold the cap secure -1- with
...
Other materials:
Volkswagen Touran Owners Manual. Warning lamps and indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Correction
Dual clutch gearbox DSG® overheated.
Do not drive
on!
Move the selector lever to position P and leave the gearbo ...
Volkswagen Touran Owners Manual. Introduction
This chapter contains information on the following subjects:
→ Controls
→ Operating notes for the heating and fresh air system
→ Information on the air conditioning system
→ Vents
→ Air recirculation mode
Displays for the Climatroni ...
© 2016-2024 Copyright www.vwtouran.net | 0.0066