Volkswagen Touran Owners Manual: Masking or switching over headlights for driving abroad
First read and observe the introductory information
and safety warnings
If you have to drive a right-hand drive vehicle in a left-hand drive country, or vice versa, the asymmetric dipped beam headlights may dazzle oncoming traffic. Therefore, the headlights must be masked or switched over if you are driving abroad.
The orientation of the headlights can be adjusted using the Travel mode menu option in the sub-menu Lights & Vision in the Settings menu in the instrument cluster .
In those vehicles where the headlights cannot be adjusted via the menu, you must apply stickers to certain parts of the headlight lenses or have the headlights adjusted by a qualified workshop. A qualified workshop can provide you with further information. Volkswagen recommends using a Volkswagen dealership for this purpose.
The use of the travel mode or of the stickers is only permissible if the period of use is limited. Please contact a qualified workshop for a permanent alteration. Volkswagen recommends using a Volkswagen dealership for this purpose.
Main beam control
First read and observe the introductory information
and safety warnings Main beam control (Light Assist)
The main beam control switches the main beam on and off again
automatically within ...
Coming home and Leaving home functions (orientation lighting)
First read and observe the introductory information
and safety warnings The Coming home function must be
switched on manually. However, the Leaving home function is controlled automatically ...
Other materials:
Volkswagen Touran Owners Manual. Trailer stabilisation
First read and observe the introductory information
and safety warnings The trailer stabilisation function
is an extension to the electronic stabilisation programme (ESP). It helps, in conjunction
with the driver steering recommendation function, to reduce the risk of rocking
when towi ...
Volkswagen Touran Service Manual. Flat Spots, Correcting
Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
...
