VW Touran manuals

Volkswagen Touran Owners Manual: Introduction

This chapter contains information on the following subjects:

 → Overview of the menu structure  

 → Using the menus in the instrument cluster  

 → Button for the driver assist systems  

 → Main menu 

 →  (multi-function display) menu 

 →  menu 

 →  sub-menu 

 →  sub-menu 

 → Sub-menu  

 → Personal convenience settings 

With the ignition switched on, the different display functions can be accessed via the menus.

The buttons in the windscreen wiper lever are not fitted in those vehicles equipped with a multi-function steering wheel. The multi-function display is controlled using the buttons on the multi-function steering wheel only.

The scope of the menus in the instrument cluster display depends on the vehicle electronics and the scope of equipment.

A qualified workshop can program and modify other functions depending on the vehicle equipment level. Volkswagen recommends using a Volkswagen dealership for this purpose.

Some menu options can only be called up when the vehicle is stationary.

If any priority 1 warning reports are being displayed, you will be unable to call up any menus. Some warnings can be confirmed with the OK button and switched off.

Additional information and warnings:

WARNING

Accidents and injuries can occur if the driver is distracted.
Volkswagen information system
...

Overview of the menu structure
First read and observe the introductory information and safety warnings  MFD (multi-function display) Driving time Current fuel consumption Average fuel consumption Fuel range ...

Other materials:

Volkswagen Touran Owners Manual. Other stowage compartments
First read and observe the introductory information and safety warnings Stowage areas in the luggage compartment Additional stowage compartments are located in the sides of the luggage compartment. Other stowage areas: In the centre console. In the door trims (front and rear). ...

Volkswagen Touran Service Manual. Taper
Taper is caused by slightly offsetting the tread and/or the belt by a few tenths of a millimeter from the geometric center of the tire. Taper cannot be recognized visually nor can it be measured with workshop equipment.     ...

© 2016-2024 Copyright www.vwtouran.net | 0.0124