Volkswagen Touran Owners Manual: Changing a blown fuse
Fig. 214 A fuse which has blown
Fig. 215 Removing or fitting the fuse using the plastic pliers ①
First read and observe the introductory information
and safety warnings Preparations
- Switch off the ignition, the lights and all electrical consumers.
- Open the appropriate fuse box .
Detecting a fuse which has blown
A melted metal strip indicates that the fuse has blown .
Shine a torch onto the fuse. This will help you to spot the blown fuse more easily.
Changing a fuse
- If applicable, take the plastic pliers out of the fuse box cover.
- For small fuses, push the catch on ① from above A.
- For bigger fuses, push the catch ① onto the fuse from the side B.
- Pull out the blown fuse.
- If the fuse has blown, replace it with a new fuse of the same amp rating (same colour and same imprint) and same size .
- Fit the cover back in place or fold the cover up.
NOTICE
Fuses in the vehicle
Fig. 212 Dash panel on the driver side:
fuse box cover
Fig. 213 In the engine compartment: fuse
box cover
First read and observe the introductory information
and safety warnings Fuses must ...
Changing bulbs
...
Other materials:
Volkswagen Touran Owners Manual. Masking or switching over headlights for driving abroad
First read and observe the introductory information
and safety warnings If you have to drive a right-hand
drive vehicle in a left-hand drive country, or vice versa, the asymmetric dipped
beam headlights may dazzle oncoming traffic. Therefore, the headlights must be masked
or switched o ...
Volkswagen Touran Service Manual. Wheel, Balancing with Fine Balancing Machine (Finish Balancer)
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
