First read and observe the introductory information
and safety warnings
Lit up | Possible cause | Correction |
---|---|---|
![]() |
Brake system fault. | ![]() Use expert assistance immediately . |
Brake fluid level is too low. | ![]() Check brake fluid level . |
|
Together with ABS indicator lamp
![]() |
Go to a qualified workshop. The vehicle can be braked without ABS. | |
The handbrake is on. | Release the handbrake. | |
![]() |
Front brake pads worn. | Go to a qualified workshop immediately. Have all brake pads checked and renewed as necessary. |
![]() |
ESP switched off by the system. | Switch the ignition on and off. If necessary, drive a short distance. |
ESP fault. | Go to a qualified workshop. | |
Together with ABS indicator lamp
![]() |
Go to a qualified workshop. The vehicle can be braked without ABS. | |
Vehicle battery has been reconnected. | ||
![]() |
TCS switched off manually. | Switch on TCS . Switch on TCS automatically by switching the ignition off and on. |
![]() |
In conjunction with ESP indicator lamp
![]() |
Go to a qualified workshop. The vehicle can be braked without ABS. |
Together with warning lamp
![]() |
||
![]() |
Brake pedal not depressed. | To select a gear, press the brake pedal. |
Flashes | Possible cause | Correction |
---|---|---|
![]() |
ESP/TCS is taking corrective action. | Remove foot from accelerator pedal. Adapt driving style to suit road conditions. |
Several warning and indicator lamps will light up briefly when the ignition is switched on while the vehicle runs functional checks. They will switch off after a few seconds.
WARNING
WARNING
NOTICE
Volkswagen Touran Owners Manual. Optical parking system (OPS)
Fig. 144 OPS screen: Ⓐ obstacle detected
in the monitored area behind the vehicle Ⓑ monitored area in front of the vehicle
Fig. 145 OPS screen: Ⓐ obstacle detected
in segment Ⓑ monitored area in front of the vehicle
First read and observe the introductory information
and safety wa ...
Volkswagen Touran Service Manual. Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the cataphoretic primer on the roof adhesive
surface -item 6-
→ Item down to the bare metal using P180 sandpaper.
Dry sand the roof pillar adhesive surface ...