Volkswagen Touran Owners Manual: Switching the TCS on and off
Fig. 137 In the centre console: button for switching the TCS on and off manually
First read and observe the introductory information
and safety warnings The electronic stabilisation programme (ESP) will function only if the engine is running. It consists of ABS, EDL and TCS.
When the engine is running, the TCS can be switched off by pressing the button
. The TCS should only be switched off in certain
situations when the traction achieved is not sufficient. For example:
- When driving in deep snow or on loose surfaces.
- When rocking the car backwards and forwards to free it from mud.
Then press the button to switch the TCS back on
.
Brake assist systems
First read and observe the introductory information
and safety warnings The brake assist systems ESP, ABS, BAS, TCS and EDL will
only function when the engine is running. They make a considerabl ...
Brake fluid
Fig. 138 In the engine compartment: cap
of the brake fluid container (variant 1)
Fig. 139 In the engine compartment: cap
of the brake fluid container (variant 2)
First read and observe the int ...
Other materials:
Volkswagen Touran Service Manual. Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Volkswagen Touran Service Manual. Visual Inspection
WARNING
Risk of injury. Follow all Warnings and Safety
Precautions. Refer to
→ Chapter "Warnings and Safety Precautions".
Prior to performing any measurements or ...
