Volkswagen Touran Service Manual: Preserving Wax (Spray Can)

Volkswagen Touran Service Manual / General Paint Information / Original Products / Preservation / Preserving Wax (Spray Can)

Definition:

Preserving Wax -D 308 SP5 A1-

Edition 04/2009

Product Description

The Preserving Wax -D 308 SP5 A1- provides optimal corrosion protection for areas in the body that are most at risk for corrosion, such as steel trim (folded edges, gaps, flanges), edges and surfaces.

This long-term corrosion protection is established through sufficient penetration as well as exceptional adhesion to the metallic surface.

The top coat compatibility and removability as well as the compatibility with the rubber and plastic attachments is created.

Application Instructions

Application

The recommended dry layer thickness is approximately 30 μm.

Technical Data

Propane-butane content	45 to 49 %
Active ingredient content	22 to 26 %
Solvent content	27 to 31 %
Viscosity (DIN 53211, 4 mm)	16 to 22 seconds
Dropping point (of solid matter)	greater than 150 C (302 F)
Cleaning	with mineral spirits
Processing temperature	+18 C through +25 C (+64.4 through +77 F)
Flashpoint PM (DIN EN 22719)	+27 C through +33 C (80.6 through 91.4 F)
Color	light beige
Application temperature	+10 C to +30 C (50 F to 86 F)
Frost resistance	through -30 C (-22 F)

Cavity Sealant

Definition: Cavity Sealant -D 330 KD1 A2- Cavity Sealant -D 330 KD2 A1- Edition 04/2010 ...

Underbody Protection

...

Other materials:

Volkswagen Touran Service Manual. Diagonal Washouts
Diagonal wear spots on tires Diagonal wear spots run at an angle of approximately 45 with respect to the plane of circumference. They usually occur once, but may also occur several times along the tire circumference. ...

Volkswagen Touran Service Manual. Wheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must be fulfilled. The tire pressure must be OK. The tire profile must not be worn on one side. The tire profile must be at least 4 mm. ...