Volkswagen Touran Owners Manual: MFD (multi-function display) menu

Volkswagen Touran Owners Manual / Overview of the vehicle / Instrument cluster / Volkswagen information system / MFD (multi-function display) menu

First read and observe the introductory information and safety warnings

The multi-function display (MFD) is equipped with two automatic memories: 1 - Trip memory and 2 - Total journey memory. The number of the current memory on display will be shown in the upper right-hand corner of the display.

When the ignition is switched on and memory 1 or 2 is shown in the display, press the OK button to switch between the two memories.
1	Trip memory	The memory collects the travel and fuel consumption data from the moment the ignition is switched on until it is switched off. If the journey is interrupted for more than two hours, the memory is automatically deleted. If the journey is continued within two hours of the ignition being switched off, the new values will be added to the existing trip recorder.
2	Total journey memory	The memory collects journey data for any number of individual journeys up to a total of 19 hours and 59 minutes or 99 hours and 59 minutes journey time or 1999.9 km (miles) or 9999 km (miles) distance travelled. If one of these maximum marks^a) is exceeded, the memory is automatically deleted and starts again at 0.

Possible displays

Menu	Function
Driving time	Driving time in hours (h) and minutes (min) that has elapsed since the ignition was switched on.
Current fuel consumption	The current fuel consumption is indicated in l/100 km (mpg) if the vehicle is moving and in litres/h (gallons/h) if the engine is on and the vehicle is at a standstill. In vehicles with a natural gas engine, the current fuel consumption is indicated in kg/100 km or m³/100 km (mls/kg or mls/m³).
Average fuel consumption	The average fuel consumption will be shown in l/100 km (mpg) after a distance of approximately 100 metres has been travelled. The display will show dashes until this point. The displayed values will be updated approximately every 5 seconds.
Fuel range	Approximate calculation of the distance in km (miles) that can still be travelled with the current fuel level under the current driving conditions. One factor used for calculating this figure is the current level of fuel consumption.
Distance	The distance travelled in km (miles) since the ignition was switched on.
Average speed	The average speed will be shown after a distance of approximately 100 metres has been travelled. The display will show dashes until this point. The displayed values will be updated approximately every 5 seconds.
Digital speed display	Current vehicle speed displayed digitally.
Digital oil temperature display	Current temperature of the engine oil displayed digitally.
Speed warning --- km/h	If the saved speed (within the range of 30 km/h (18 mph) and 250 km/h (155 mph)) is exceeded, an audible and visible warning will be emitted.

Switching between displays

Vehicles without a multi-function steering wheel: press the rocker switch on the windscreen wiper lever.

Vehicles with a multi-function steering wheel: press button or .

Saving a speed for the speed warning

Select the Speed warning --- km/h display.

Press the OK button to save the current speed and activate the warning system.

If necessary, use the rocker switch on the windscreen wiper lever or the buttons or on the multi-function steering wheel within approximately 5 seconds to set the desired speed. Then press OK again or wait a few seconds. The speed is now saved and the warning is activated.

To deactivate, press OK. The stored speed will be deleted.

Deleting memory 1 or 2 manually

Select the memory that you wish to delete.

Press and hold the OK button for approximately two seconds.

Personal selection of displays

In the Settings menu, you can specify which of the MFD displays should be shown in the instrument cluster display. You can also change the units of measurement for the display .

^a) Changes depending on the instrument cluster version.

Main menu

First read and observe the introductory information and safety warnings Menu Function See MFD Information and settings for the m ...

Settings menu

First read and observe the introductory information and safety warnings Settings menu Function Language Setting the language for the display texts a ...

Other materials:

Volkswagen Touran Owners Manual. Changing bulbs in the tail light cluster in the tailgate
Fig. 220 In the tailgate: removing the cover Fig. 221 In the tailgate: removing the bulb holder First read and observe the introductory information and safety warnings The bulbs for the reversing light, rear light and rear fog light are located in the tailgate. ...

Volkswagen Touran Service Manual. Two-Part Spray Filling Paste
Definition: Two-Part Spray Filling Paste -ALN 788 007- Edition 06/2011 Product Description The Two-Part Spray Filling Paste -ALN 788 007- is a two-part spray filling paste us ...