First read and observe the introductory information and safety warnings
Light & Vision menu | Function |
---|---|
Coming Home | Settings for how long the vehicle should be lit once it is locked or unlocked, or for switching the function on or off . |
Leaving Home | |
Footwell lights | Setting the brightness of the footwell lights when the dipped beam headlight is on, or switching the function on or off. |
Daytime running lights | Activating / deactivating daytime running lights. |
Lane change flash | Switching the lane change flash on or off. When the lane change flash function is switched on, the turn signal will flash at least three times when the turn signal lever is gently tapped . |
Travel mode | Switches travel mode on and off. When the travel mode is switched on, the headlights of a left-hand drive vehicle will be adjusted for use on the left-hand side of the road and those in a right-hand drive vehicle for driving on the right-hand side of the road. Adjust the headlights in countries in which the traffic drives on the other side of the road. Travel mode may only be used for a short period of time and must be deactivated as soon as it is no longer required. |
Factory setting | Resetting all the settings in the Light and Vision sub-menu to the factory settings. |
Back | The display returns to the Settings menu. |
Volkswagen Touran Owners Manual. Tread depth and wear indicators
Fig. 185 Tyre tread: wear indicators
First read and observe the introductory
information and safety warnings Tread depth
Difficult driving situations demand the deepest possible tread depth for the
tyres and the same tread depth for the tyres on the front and rear axle. This
applies in ...
Volkswagen Touran Service Manual. Run-Flat Tire, Overview of a PAX Tire
PAX tires involve specially developed system that exhibits
the following differences in comparison to conventional tires:
Pax Tires with Supporting Ring
-I- PAX tires with air
...