First read and observe the introductory information and safety warnings
Function | Action |
---|---|
Locking the vehicle and activating the deadlock mechanism. | Press the button on the vehicle key once. |
Locking the vehicle without activating the deadlock mechanism. | Press the button on the vehicle key twice. |
Press the central locking button in the driver door once. |
The deadlock mechanism blocks the door opening levers if the vehicle has been locked. This makes it more difficult to break into the vehicle. The doors can no longer be opened from the inside .
When the ignition is switched off, the instrument cluster display will inform you about the activated deadlock mechanism (SAFE locking or SAFELOCK).
The following applies when the deadlock mechanism is deactivated:
Indicator lamp in the driver door
After locking the vehicle: | Meaning |
---|---|
A red LED flashes for approximately two seconds in short intervals, and then somewhat slower. | The deadlock mechanism is activated. |
A red LED flashes for approximately two seconds and then goes out. The light starts to flash again after approximately 30 seconds. | The deadlock mechanism is deactivated. |
A red LED is lit permanently for approximately 30 seconds. | Fault in the locking system. Go to a qualified workshop. |
WARNING
Always take care when using the deadlock mechanism otherwise you could cause accidents or injuries.Volkswagen Touran Service Manual. Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
The Siemens wheel electronics does not have a
microencapsulated ...
Volkswagen Touran Service Manual. Crimping Pliers with Insert
The Crimping Pliers without Insert -VAS1978/1- with Crimping
Pliers - Insert 2 -VAS1978/2- is a component of the Wiring
Harness Repair Set -VAS1978- and is used to crimp the connector
during the wiring harness repair.
...